37.7CC T-Pillar Driver, 4-Stroke Pneumatic Rear Driver, Heavy-Duty Fence Pile Driver Shock Absorption Double Pile Heads, Impact Frequency of 1300-3000BPM, Professional Outdoor Installation

Good tools are indispensable to complicated piling operations. Our pile driver can help you solve this problem. Made of high-quality plastic, iron, and aluminum, this item lays a foundation for your long-term use. 1.2KW power, 37.7cc 4-stroke engine, and 8500 r/min speed can greatly improve your efficiency. With it, you can completely say goodbye to the traditional piling method and work more easily.DetailsRound Corners: Compared with traditional square corners, an arc design can better care for your skin.Two Pile Heads: Two heads of different sizes allow wider application, and the threaded connection is also convenient for you to replace.Damping Spring: Four springs can effectively reduce the vibration of the engine and ensure the smooth operation of the piling work.Lubricating Oil Filler: The filler with the “GREASE” prompt is convenient for you to add lubricating oil in time.Practical Air Filter: It can filter out impurities in time, avoid blocking and ensure smooth operation.ApplicationIt is applicable to a series of piling projects such as gardening, road fencing, sea pontoon, agricultural fencing, grounding angle iron, orchard support, photovoltaic power station, geophysical exploration, construction, vegetable planting, fence protection, dam reinforcement, flood control and emergency blocking, pond maintenance, etc. It can be widely used in homes, construction sites, power stations, farms, and other places.SpecificationStyle: ModernMount Type: Floor StandingVolume: ≤104dBMaterial: Plastic, Aluminum, IronEngine Type: Air-Cooled Single-Cylinder 4-StrokeFuel: Pure Oil (#92/95)Fuel Tank Capacity: 0.65L / 27.47ozFuel Consumption Rate: ≤0.47L / 19.87oz / kw.hImpact Energy: 20-45JMax. Power and Speed: 1.2kw / 8500r/minImpact Times: 1300-3000bpmMax. Torque and Speed: 1.2Nm / 5500/minPower Source: Gasoline PoweredStarter System: Hand Pull StartPile Head Size: φ45mm / 1.77in, Max φ55mm / 2.16inPackage Included1 * Pile Driver1 * Fuel Tank1 * Filter Oil Nozzle1 * Funnel2 * Piling Heads1 * Tool Bag1 * English Manual1 * Storage CaseAll Accessories for InstallationNotesPlease install and use it in strict accordance with the instructions, and pay attention to the safety precautions inside.Please note that the product cannot be used for piling in water.If the pile driver has the problem of not hammering, please check whether too much butter is added at the place where the butter is added, clean up the excess oil in the cylinder before disassembly, and add about 20 grams of high-temperature resistant butter again. And adjust the speed of carburetor. If the impact frequency is too high to hold, the impact frequency can be reduced. Otherwise, the impact frequency should be increased. Please note that this is fine-tuning.When the machine is not easy to start, pay attention to maintenance first. Add four-stroke oil into the tank and pure gasoline into the white tank. It is better to replace the fuel tank every day. The starting rope can be pulled out by one arm for two or three times, but this is also related to the temperature, sometimes it needs to be pulled several times. When the cold engine starts, close the damper (for good starting, open and start the warm engine), and open the damper after the machine is normal.Please pay attention to whether the oil inlet pipe is full of oil before use.When starting the product, please pull the starter quickly and continuously without stopping, and do not pull too hard.Please note that this product cannot be used for piling in water.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• ✨【Premium Material】Made with high-quality plastic, iron, and aluminum, this 37.7CC T-Pillar Driver is designed to be solid, wear-resistant, impact-resistant, and rustproof. It ensures long-lasting durability for heavy-duty fence piling, providing both aesthetic appeal and practical functionality without frequent replacements.
• ✨【High Efficiency】Equipped with a powerful 37.7cc 4-stroke engine, this pile driver delivers 1.2KW power and an impressive 8500RPM speed. With up to 45J impact energy and an impact frequency of 1300-3000bpm, it guarantees efficient and fast operation for all outdoor installation and piling tasks.
• ✨【Shock Absorption System】Designed with a shock-absorbing handle, this fence pile driver reduces vibration and ensures comfort during extended use. The ergonomic anti-slip handle helps minimize operator fatigue, making it ideal for professional, heavy-duty outdoor installation projects.
• ✨【Good Heat Dissipation】Featuring an advanced air cooling model and multiple cooling holes, this pile driver effectively reduces heat buildup during operation. This prevents overheating, enhances safety, and extends the life of the product, ensuring reliable performance even under intense conditions.
• ✨【Simple Installation and Use】With its simple structure, ergonomic handle, and easy-to-use recoil pull-start system, this gasoline-powered pile driver is quick to install and operate. It includes a detailed manual and all necessary accessories, ensuring you can get started with minimal effort for your outdoor installation needs.